Marine Tachometer 5000 RPM

The VDO Marine Tachometer 5000 RPM is a robust and precise gauge designed specifically for marine applications, capable of measuring engine RPM up to 5000 revolutions per minute. It features a clear, easy-to-read display, providing accurate and reliable readings essential for monitoring engine performance in boats and other watercraft. With a construction built to withstand the harsh marine environment, this tachometer ensures durability and long-lasting performance. The VDO Marine Tachometer 5000 RPM is crucial for maintaining optimal engine operation and enhancing overall safety and efficiency on the water.



Specification:

  • Colour: Black
  • Panel hole diameter: 85 mm - 3 3/8"
  • Range: 0 to 5.000 RPM
  • Lens: Dual - Anti-Fog
  • Retail package 1 Tachometer

Sizes and mounting:

Installation (Hole) diameter and Outside diameter: 85 mm - 3 3/8 Inch and 93 mm - 3 2/3 Inch
Installation depth: 50 mm
Locking height with Spinlock nut: 0.5 mm - 20 mm
Locking height with bracket: 2 mm - 15 mm (Optional)
Flushmount: Optional kit A2C59510864
Successor of: N02-012-153 (154)

Functionality:

Analog RPM measurement range: 0 to 5.000 RPM
Display functionality: Engine hours counter
Voltmeter
Clock
Sensor signal input tachometer: Alternator terminal: W
Ignition terminal: 1
Outboard engine: Lightning coil
Accuracy: ± 2.5% of full scale reading
Connection: Hirschmann 8 & 14 pins MQS connector

Power supply:

Operating voltage: 8 to 32 V DC
Current consumption: < 175 mA including warning LED
Reverse polarity protection: Yes - 1 Minutes
Short circuit protection: Yes - 1 Minute

Dial & Pointer:

Deflection angle: 240°
Dial colour: Black
Dial Illumination: Amber LED backlight 605nm
Pointer: White LED backlight
Warning LED: Red (632nm)
Programming: Veratron USB software kit

Design:

Model: Veratron ViewLine Marine
Lens: Dual - Anti-glare - Anti-Fog
Standard bezel: Round black (Interchangeable)

Protection and standards:

Front protection class: IP67 (IEC 60529)
Rear protection class: IP52
Relative humidity: Maximum 95%
Operating temperature: -30°C to +80°C (Plastic bezel)
CE standard: Yes
DNV GL Certification: Yes
Mechanical shock continuous: 25G - 6ms - 1Hz
Mechanical single shock 100G - 11ms
Free fall test: 1 Meter - 3x
Housing flame retarding: UL94-VD

Retail package:

  • Veratron ViewLine Black A2C53194867 Multifunction Tachometer
  • Spinlock nut
  • Bezel round black (Interchangeable)
  • Adapter cable with 8 & 14 pins Hirschmann MQS connector
  • Rubber seal
  • QR code
  • Safety instructions and installation manual
  • Veratron RPM sender not included